-
35+ Years Experience
-
Society of Gilders Member
-
VCA
Postgraduate -
International Clientele
You have a venue, a programme, and a date the doors have to open. I am Marcus Walkley, and my commercial gilding services go into hotels, resorts, casinos and public buildings: Four Seasons in Singapore Crown Casino in Melbourne and in Perth, Karma Kandara in Bali, and the Ritz-Carlton. The State Theatre at Arts Centre Melbourne ran 10 months in gold foil, for the client I had already worked with at Hamer Hall. On a job like that the gold is the visible part and the smaller part of the problem. The rest is sequence: who works before me, who works after me, and what the room is doing while I am in it.
Where gilding sits in your programme
Gold goes on late. The surface underneath has to be prepared, sound and dry before any leaf is laid, which puts me after the plasterer and the painter, and ahead of joinery, glazing, lighting and the final clean. Run it out of order and either the leaf goes onto a surface that is still moving, or a trade comes back through the room and marks it.
So the first thing I want from you is the programme, ahead of the drawings. The day the room hands over, and the hours I can have it. Nights, dark days, or one floor at a time, and who is working above me while I am there.
I want to see the room before I price it, with the builder there if that can be arranged. Access and the state of the surface tell me more than the drawings do. Ceiling height settles whether I work off trestles or a lift, and I hold an EWPA Yellow Card for elevated work platforms. Getting onto the site is a paperwork question. I carry a Work Safe OH&S White Card, Work Safe Construction Induction and Building OH&S, and I hold CFMEU membership in VIC, QLD and NT. An interstate site does not stall while an induction is arranged. I work on site, travelling from my Elwood studio.
How long I need depends on what the surface is doing more than on how large it is. The gold foil gilding in the State Theatre at Arts Centre Melbourne is one end of that range and a single boardroom ceiling is the other. Across my career I have gilded over 11,000 square metres of contemporary commercial ceilings, so a large area inside a fixed window is familiar ground. Ask about lead time early. Once a date is agreed I hold it.
Living with the finish once the venue opens
The moment the doors open, the surface belongs to the public. Who leans on it, who cleans it, and with what?
Those answers decide the metal. Gold leaf keeps its colour and is the safe choice at hand height in a room full of people. Silver and copper shift over time unless they are sealed, and that is settled before anything is ordered rather than after. Height changes the calculation as well. A ceiling nobody can reach will carry a finish that would not last a season on a lift lobby wall or the front of a bar.
Leaf can also be repaired in place, section by section, which matters in a venue that will trade for years before it closes again. The leaf is sourced from suppliers worldwide, and I guarantee no child labour in its production. Guarantees and warranties cover both materials and workmanship.
If the room is a lobby, a dining room or a shop floor
What I ask first is what the space has to do while the work happens, and what it has to survive afterwards
-
A luxury hotel lobby, where the building is usually still trading. The work is staged and screened, and it goes on around guests rather than waiting for them to leave.
-
A restaurant or bar, where a seated guest studies the ceiling for the length of a meal, under lighting chosen to flatter it. That is a closer read than a corridor ever gets.
-
A retail shop floor, where the trading date does not move and the centre around you keeps its own hours. Nothing I do is sequenced tighter.
-
An office reception or boardroom, where the room cannot be shut for a fortnight. The work comes apart into stages that fit around the people still using it.
The same surfaces come up in all four. A ceiling or a coffer, a column, a bar front, a reception desk, a lift surround, a sculpture. Sometimes it is one panel that has to hold the room by itself. Gilding is one of the last commercial interior finishes to go on, whichever of those you have. There is a run of hospitality interiors and public rooms in my commercial portfolio, from Crown Casino in Melbourne to Four Seasons Hotel in Singapore .
Working with your architect, decorator and builder
If you are the architect or the decorator, the scheme is yours. My job is to make the metal do what your drawing says it should, and to tell you early if it will not.
I have worked inside other people’s schemes from Sydney to Spain, Singapore to Shanghai to Aix en Provence. In practice that means being one specialist trade inside somebody else’s commercial fit out. A decorator wants the conversation about lustre, about how a colour reads under the specified lighting, and about how much movement is wanted in the surface. An even field and a broken antique finish are different jobs on the same wall. A builder wants three answers: how long, what access, and what needs protecting while I am on site.
What Walkley Art brings onto your site
Walkley Art is my own practice, and it has been for 36 years. I am the person who looks at your room, quotes the work and lays the leaf on it. On a large commercial programme a team of highly skilled professionals carries out the work to the specification I set.
Formally I am an artist, with a Diploma of Fine Art from Prahran Technical College and postgraduate study at the Victorian College of the Arts. The gilding I learned from Jennifer Bennell at the Studio of Painted Finishes in Sydney, and I am a member of the Society of Gilders. On a commercial interior that training shows in small decisions. Where a surface should stay quiet. Where it should be the thing you see from the door.
Christopher W. Norton, President EMEA of Four Seasons Hotels and Resorts, put it this way: “Marcus’s creative focus, attention to detail and technical mastery combined to achieve well above our high expectations.” More client comments sit on my testimonials page.
Tell me the venue and the date
A useful first email is short: the venue, the surface, and the day it has to be finished. From that I can tell you where the gilding falls in your sequence, how many days in the room I need, and whether the window you have been given is enough.
The earlier that reaches me, the more of your programme I can still work around: +61 411 622 711, marcus@walkleyart.com.