Gilding Gold Silver Copper 23

Copper Gilding: Genuine Copper Leaf, and a Colour That Keeps Moving

  • 35+ Years Experience
    35+ Years Experience
  • Society of Gilders Member
    Society of Gilders Member
  • VCA <br>Postgraduate
    VCA
    Postgraduate
  • International Clientele
    International Clientele

Copper gilding means genuine copper leaf. Real metal, beaten into sheets and hand applied to a prepared surface, leaf by leaf, with nothing plated, dipped or sprayed at any stage. Worth saying at the top, because the plating trades use the same two words for work in jewellery and electronics, where copper is the metal underneath, not the one you are meant to see. Here it is the surface itself. I am Marcus Walkley, and gold, silver and copper leaf have been my materials for 36 years. Copper is the only one of the three that will not hold still.

What copper does after the job is finished

Copper has no final colour. It has the colour it goes on at, then it deepens, and then it keeps going. That is not a fault in the leaf, and no gilder prevents it. It is what the metal is.

How far it travels, and how quickly, is decided by the room and not by me: the light, the air, whether hands are on it daily. I give no timetable for that, because I would be inventing one.

Copper and gold foil β€œDutch Metal” decorative finishes are the only ones on my bench that go on working after I have left the building. Gold holds. Silver darkens and can then be held there. Copper records the room it lives in, which is the whole reason a certain kind of client asks for it by name.

For another client that is precisely the wrong answer, better found out now than at handover. If you want one appearance held indefinitely, gold is the metal that does it, and where weather reaches a surface it is the only one I specify.

Gilding Gold Silver Copper 1 1 775x800

Seal it, or let it run

The real decision on a copper job is not which metal, since you arrived having made that one. It is what happens once the leaf is down.

Sealed, the copper or gold foil are held near the colour they started at. Held near, not frozen: a seal slows the change but does not end it, and a coating sold as permanent claims more than it can do. You get a surface that stays close to where it began, and is maintained as a coating from then on.

Left open, any foil including copper goes where the room takes it. These foils react differently to pure gold leaf which permanently remains as originally gilded . The parts that get handled read differently from the parts that do not, and in time the surface is a record of how the room is used. On the right piece that is the finish rather than the failure of one, and I am happy to work to it, provided it was chosen.

What the surface is for usually settles it. A copper leaf ceiling nobody can reach is a different question from a set of doors people put their hands on all day. Either way the answer belongs in the brief, because it decides which of two quite different copper leaf finishes you are commissioning.

Gilding Gold Silver Copper 6 1 775x800

Genuine copper leaf, laid by hand

Three different things get called copper on a wall, and they are taken for each other constantly:

  • Bullet point
    Genuine copper leaf

    real metal in sheet form, laid by hand over a prepared ground. That is this page.

  • Bullet point
    Plated metal

    another trade, in jewellery, hardware and electronics. It borrows the words and shares nothing else.

  • Bullet point
    A copper metallic finish out of a tin

    paint carrying metallic pigment, which gives the colour and none of the metal.

What separates the first from the last is movement. Paint stays the same from every angle and goes flat under a lamp. Leaf behaves like metal: walk past it and the reflection travels with you. Look along it in raking light and the overlaps between sheets are faintly visible, the signature of hand applied copper leaf.

This is traditional copper leaf work: the leaf is set into an adhesive the trade calls a size, then pressed down and the surplus taken off by hand. What sits underneath decides how it reads, since a ridge or a soft patch comes straight through the metal, so most of the hours on a copper job go into the ground before any copper appears.

What copper sits well beside

Copper is not a stand-in for gold. It is warmer and redder than the other two metals, and a room that wants gold will not be talked into copper.

It belongs with warm materials: timber, leather, bronze and brass fittings, terracotta, warm stone, and dark walls that let the red come forward. In a cool grey and chrome scheme it argues with everything, which is the room where silver goes instead.

A copper leaf ceiling warms the light that comes back down into the room, so the space reads warmer after dark without a wall changing colour. Most copper work is smaller than that: copper leaf detailing on a moulding or a fireplace surround, a panel, a sculpture. The luxury copper finishes I am asked for are usually one element in a room rather than a whole envelope of it.

Copper leaf restoration starts with a decision the other metals never force: whether you are matching the colour the surface has now or the colour it had when it was laid. Only one of them is still in front of you, and the answer decides whether new leaf is worked into what survives or the element is taken back and gilded again.

Copper runs through my gilding portfolio alongside the other two metals, and over raw linen in the artworks portfolio, where leaf, resin and acrylic are built up in layers.

Walkley Art works in three metals, and copper is the restless one

Walkley Art is one gilder: me, for 36 years, and copper leaf gilding has been among my services the whole time, alongside gold and silver. A surface that keeps changing is one you want laid by somebody who has watched it change on other people’s walls.

The training behind it: a Diploma of Fine Art at Prahran Technical College, postgraduate study in Fine Art at the Victorian College of the Arts, and specialist training with Jennifer Bennell at the Studio of Painted Finishes in Sydney. I am a member of the Society of Gilders. The leaf is premium material bought from suppliers globally, I guarantee no child labour in its production, and guarantees and warranties cover both materials and workmanship.

I work from a studio at 143 Brighton Road, Elwood, taking commissions across Melbourne and the rest of Australia, along with work overseas for architects and decorators I have known for years. Artisan copper leaf is not sold by the square metre: custom copper gilding is judged room by room, since two spaces given the same brief will not age alike. What clients made of it is on my testimonials page.

Gilding Gold Silver Copper 36 775x800

Which copper you want to end up with

This one is yours to answer: seal the leaf and hold it near the colour it starts at, or leave the metal open and let it age. So which do you want, the copper you commission or the copper the room makes of it?

That call is easier with the metal in front of you and the room’s own light on it. If you cannot answer it yet, that is the ordinary position.

Say which way you are leaning, and what the surface is: +61 411 622 711, or marcus@walkleyart.com.

Gilding Gold Silver Copper 6 775x800